Arsenic in Well Water: Health Risks, Testing, and Treatment in Maryland
July 5, 2026 · 5 min read · By Deep Dive Plumbing Maryland
Arsenic is odorless and tasteless. You cannot detect it without testing. If you have a private well and have never tested for arsenic, a test is recommended — especially if your well is deep or in an area with certain geological formations.
Arsenic is a naturally occurring element found in soil and rock throughout Maryland. While most Maryland wells have arsenic levels below the EPA limit of 10 ppb, some do not — and the only way to know is to test. Long-term exposure to elevated arsenic is linked to serious health effects including cancer.
Treatment Options for Arsenic
Reverse osmosis (point of use)
Most effective for drinking water. Removes 90–99% of arsenic. Installed under the kitchen sink. Does not treat whole house.
Adsorptive media filter (whole house)
Iron-based media (GFO, ArsenX) adsorbs arsenic from the water. Effective for whole-house treatment. Media needs periodic replacement.
Oxidation + filtration
Arsenite (As III) must be oxidized to arsenate (As V) before it can be effectively removed by most filters. A water test identifies which form is present.
Frequently Asked Questions
Is arsenic common in Maryland well water?
Arsenic occurs naturally in Maryland groundwater, particularly in areas with certain geological formations. While not as prevalent as in some New England states, arsenic above the EPA maximum contaminant level (MCL) of 10 ppb (parts per billion) is found in some Maryland wells, particularly in older, deeper wells and in areas with specific rock types. The only way to know if your well has arsenic is to test for it.
What are the health effects of arsenic in drinking water?
Long-term exposure to arsenic above 10 ppb is associated with increased risk of bladder, lung, and skin cancers. It can also cause cardiovascular disease, diabetes, and neurological effects. Arsenic is odorless and tasteless — you cannot detect it without testing. The EPA set the MCL at 10 ppb based on a balance of health risk and treatment feasibility.
How do you remove arsenic from well water?
The most effective treatment for arsenic in well water is reverse osmosis (RO) at the point of use (under the kitchen sink). RO removes 90–99% of arsenic. For whole-house treatment, adsorptive media filters (iron-based media like GFO or ArsenX) are effective. The right treatment depends on the arsenic level, the form of arsenic (arsenite vs. arsenate), and other water quality parameters.
Should I test my well for arsenic?
Yes — especially if you have never tested for it. Maryland recommends testing private wells for arsenic at least once, and more frequently if you are in a higher-risk area or if your well is deep. A comprehensive water test at a certified lab that includes arsenic is recommended. If arsenic is detected above 10 ppb, treatment is recommended.
Related Resources